| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadImage.getMaxPoint()
Gets the max point.
|
Cad3DPoint |
CadImage.getMinPoint()
Gets the min point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
Cad2LineAngularDimension.getAngularArcDefinitionPoint()
Gets or sets the angular arc definition point.
|
Cad3DPoint |
CadLeader.getAnnotationPlacementPointOffset()
Gets or sets offset of last leader vertex from annotation placement point
|
Cad3DPoint |
CadAngularDimension.getArcDefinitionPoint()
Gets arc definition point
|
Cad3DPoint |
CadArc.getArcExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadHelix.getAxisBasePoint()
Gets or sets the axis base point.
|
Cad3DPoint |
CadRevolvedSurface.getAxisPoint()
Gets or sets the axis point.
|
Cad3DPoint |
CadHelix.getAxisVector()
Gets or sets the axis vector.
|
Cad3DPoint |
CadRevolvedSurface.getAxisVector()
Gets or sets the axis vector.
|
Cad3DPoint |
CadViewport.getAxisXOfUcs()
Gets or sets the axis x of UCS.
|
Cad3DPoint |
CadViewport.getAxisYOfUcs()
Gets or sets the axis y of UCS.
|
Cad3DPoint |
CadBlockEntity.getBasePoint()
Gets or sets the base point.
|
Cad3DPoint |
CadMLeaderContextData.getBasePoint()
Gets or sets basepoint.
|
Cad3DPoint |
CadMLeaderContextData.getBlockContentNormalDirection()
Gets or sets the block content normal direction.
|
Cad3DPoint |
CadMLeaderContextData.getBlockContentPosition()
Gets or sets the block content position.
|
Cad3DPoint |
CadMLeader.getBlockContentScale()
Gets or sets the block content scale.
|
Cad3DPoint |
CadMLeaderContextData.getBlockContentScale()
Gets or sets the block content scale.
|
Cad3DPoint |
CadDimensionBase.getBlockTranslationVector()
Gets or sets the block translation vector.
|
Cad3DPoint |
CadMLeaderLine.getBreakEndPoint()
Gets or sets the break end point.
|
Cad3DPoint |
CadMLeaderNode.getBreakEndPoint()
Gets or sets the break end point.
|
Cad3DPoint |
CadMLeaderLine.getBreakStartPoint()
Gets or sets the break start point.
|
Cad3DPoint |
CadMLeaderNode.getBreakStartPoint()
Gets or sets the break start point.
|
Cad3DPoint |
CadCircle.getCenterPoint()
Gets or sets the centerPoint.
|
Cad3DPoint |
CadEllipse.getCenterPoint()
Gets or sets the centerPoint.
|
Cad3DPoint |
CadViewport.getCenterPoint()
Gets or sets the center point.
|
Cad3DPoint |
CadGeoData.getCoordinateSystemCoordinatesReferencePoint()
Gets or sets the coordinate system coordinates reference point.
|
Cad3DPoint |
CadDimensionOrdinate.getDefinition13()
Gets or sets the definition13.
|
Cad3DPoint |
CadDimensionOrdinate.getDefinition14()
Gets or sets the definition14.
|
Cad3DPoint |
CadDimensionBase.getDefinitionPoint()
Gets or sets the definition point.
|
Cad3DPoint |
Cad2LineAngularDimension.getDefinitionPoint1()
Gets or sets the definition point1.
|
Cad3DPoint |
CadAlignedDimension.getDefinitionPoint1()
Gets or sets the definition point1.
|
Cad3DPoint |
CadRotatedDimension.getDefinitionPoint1()
Gets or sets the definition point1.
|
Cad3DPoint |
Cad2LineAngularDimension.getDefinitionPoint2()
Gets or sets the definition point2.
|
Cad3DPoint |
CadAlignedDimension.getDefinitionPoint2()
Gets or sets the definition point2.
|
Cad3DPoint |
CadRotatedDimension.getDefinitionPoint2()
Gets or sets the definition point2.
|
Cad3DPoint |
CadGeoData.getDesignPoint()
Gets or sets the design point.
|
Cad3DPoint |
CadMText.getDirectionVector()
Gets or sets the direction vector.
|
Cad3DPoint |
CadTolerance.getDirectionVector()
Gets or sets the direction vector.
|
Cad3DPoint |
CadMLeaderNode.getDoglegVector()
Gets or sets the dogleg vector.
|
Cad3DPoint |
CadSpline.getEndTangent()
Gets or sets the end tangent.
|
Cad3DPoint |
CadBaseExtrudedEntity.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadCircle.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadDimensionBase.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadEllipse.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadInsertObject.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadLine.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadLwPolyline.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadMText.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadMultiLine.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadPoint.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadShape.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadSolid.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadSpatialFilter.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadText.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadTolerance.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadTrace.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadUnderlay.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadText.getFirstAlignment()
Gets or sets the first alignment.
|
Cad3DPoint |
Cad3DFace.getFirstCorner()
Gets or sets the first corner.
|
Cad3DPoint |
CadSolid.getFirstCorner()
Gets or sets the first corner.
|
abstract Cad3DPoint |
CadBaseInfinityEntity.getFirstPoint()
Gets or sets the first point .
|
Cad3DPoint |
CadLine.getFirstPoint()
Gets or sets the first Point.
|
Cad3DPoint |
CadRay.getFirstPoint()
Gets or sets the first point .
|
Cad3DPoint |
CadTrace.getFirstPoint()
Gets or sets the first point.
|
Cad3DPoint |
CadXLine.getFirstPoint()
Gets or sets the first point .
|
Cad3DPoint |
Cad3DFace.getFourthCorner()
Gets or sets the forth corner.
|
Cad3DPoint |
CadSolid.getFourthCorner()
Gets or sets the fourth corner.
|
Cad3DPoint |
CadTrace.getFourthPoint()
Gets or sets the fourth point.
|
Cad3DPoint |
CadLeader.getHorizontalDirection()
Gets or sets the horizontal direction.
|
Cad3DPoint |
CadLayout.getInsertionBasePoint()
Gets or sets the insertion base point.
|
Cad3DPoint |
CadAlignedDimension.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadInsertObject.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadMText.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadRasterImage.getInsertionPoint()
Gets or sets insertion point value.
|
Cad3DPoint |
CadRotatedDimension.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadShape.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadTolerance.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadUnderlay.getInsertionPoint()
Gets or sets the insertion point .
|
Cad3DPoint |
CadMLeaderNode.getLastLeaderLinePoint()
Gets or sets last leader line point.
|
Cad3DPoint |
CadLeader.getLastLeaderVertex()
Gets or sets the last leader vertex.
|
Cad3DPoint |
CadAngularDimension.getLeftBottomPoint()
Gets left bottom point
|
Cad3DPoint |
CadLight.getLightPosition()
Gets or sets the light position.
|
Cad3DPoint |
CadSpatialFilter.getLocalCoordinateSystem()
Gets or sets the local coordinate system.
|
Cad3DPoint |
CadOle2Frame.getLowerRightCorner()
Gets or sets the lower right corner.
|
Cad3DPoint |
CadEllipse.getMajorEndPoint()
Gets or sets the majour end point.
|
Cad3DPoint |
CadLayout.getMaxExtents()
Gets or sets the maximum extents.
|
Cad3DPoint |
CadDimensionBase.getMiddleTextLocation()
Gets or sets the middle text location.
|
Cad3DPoint |
CadMultiLineVectorBlock.getMilterVector()
Gets or sets the milter vector.
|
Cad3DPoint |
CadLayout.getMinExtents()
Gets or sets the minimum extents.
|
Cad3DPoint |
CadEllipse.getMinorEndPoint()
Gets the minor end point.
|
Cad3DPoint |
CadLeader.getNormalVector()
Gets or sets normal vector
|
Cad3DPoint |
CadSpline.getNormalVector()
Gets or sets the normal vector
|
Cad3DPoint |
CadViewport.getOriginUcs()
Gets or sets the origin UCS.
|
Cad3DPoint |
CadMLeaderContextData.getPlaneOriginPoint()
Gets or sets a value indicating whether [plane origin point].
|
Cad3DPoint |
CadMLeaderContextData.getPlaneXAxisDirection()
Gets or sets the plane x axis direction.
|
Cad3DPoint |
CadMLeaderContextData.getPlaneYAxisDirection()
Gets or sets the plane y axis direction.
|
Cad3DPoint |
CadPoint.getPointLocation()
Gets or sets the point location.
|
Cad3DPoint |
Cad2LineAngularDimension.getRadiusDefinitionPoint()
Gets or sets the radius definition point.
|
Cad3DPoint |
CadDiametricDimension.getRadiusDefinitionPoint()
Gets or sets the radius definition point.
|
Cad3DPoint |
CadRadialDimension.getRadiusDefinitionPoint()
Gets or sets the radius definition point.
|
Cad3DPoint |
CadExtrudedSurface.getReferenceVector()
Gets or sets reference vector.
|
Cad3DPoint |
CadAngularDimension.getRightBottomPoint()
Gets right bottom point
|
Cad3DPoint |
CadAngularDimension.getRightTopPoint()
Gets right top point
|
Cad3DPoint |
CadText.getSecondAlignmentPoint()
Gets or sets the second alignment point.
|
Cad3DPoint |
Cad3DFace.getSecondCorner()
Gets or sets the second corner.
|
Cad3DPoint |
CadSolid.getSecondCorner()
Gets or sets the second corner.
|
Cad3DPoint |
CadLine.getSecondPoint()
Gets or sets the second Point.
|
Cad3DPoint |
CadTrace.getSecondPoint()
Gets or sets the second point.
|
Cad3DPoint |
CadMultiLineVectorBlock.getSegmentDirection()
Gets or sets the segment direction.
|
Cad3DPoint |
CadHelix.getStartPoint()
Gets or sets the start point.
|
Cad3DPoint |
CadMultiLine.getStartPoint()
Gets the start point.
|
Cad3DPoint |
CadSpline.getStartTangent()
Gets or sets the start tangent.
|
Cad3DPoint |
CadExtrudedSurface.getSweepVector()
Gets or sets sweep vector.
|
Cad3DPoint |
CadLight.getTargetLocation()
Gets or sets the target location.
|
Cad3DPoint |
CadMLeaderContextData.getTextDirectionPoint()
Gets or sets text direction point.
|
Cad3DPoint |
CadMLeaderContextData.getTextLocationPoint()
Gets or sets text location point.
|
Cad3DPoint |
CadMLeaderContextData.getTextNormalDirection()
Gets or sets text normal direction.
|
Cad3DPoint |
Cad3DFace.getThirdCorner()
Gets or sets the third corner.
|
Cad3DPoint |
CadSolid.getThirdCorner()
Gets or sets the third corner.
|
Cad3DPoint |
CadTrace.getThirdPoint()
Gets or sets the third point.
|
Cad3DPoint |
CadSweptSurface.getTwistControlVector()
Gets or sets the twist control vector.
|
Cad3DPoint |
CadLayout.getUcsOrigin()
Gets or sets the UCS origin.
|
Cad3DPoint |
CadLayout.getUcsXAxis()
Gets or sets the UCS x axis.
|
Cad3DPoint |
CadLayout.getUcsYAxis()
Gets or sets the UCS y axis.
|
abstract Cad3DPoint |
CadBaseInfinityEntity.getUnitDirectionVector()
Gets or sets the unit direction vector.
|
Cad3DPoint |
CadRay.getUnitDirectionVector()
Gets or sets the unit direction vector.
|
Cad3DPoint |
CadXLine.getUnitDirectionVector()
Gets or sets the unit direction vector.
|
Cad3DPoint |
CadGeoData.getUpDirection()
Gets or sets up direction.
|
Cad3DPoint |
CadOle2Frame.getUpperLeftCorner()
Gets or sets the upper left corner.
|
Cad3DPoint |
CadRasterImage.getUVector()
Gets or sets U vector.
|
Cad3DPoint |
CadMultiLineVectorBlock.getVertex()
Gets or sets the vertex.
|
Cad3DPoint |
CadSection.getVerticalDirection()
Gets or sets the vertical direction.
|
Cad3DPoint |
CadViewport.getViewDirectionVector()
Gets or sets the view direction vector.
|
Cad3DPoint |
CadViewport.getViewTargetVector()
Gets or sets the view target vector.
|
Cad3DPoint |
CadRasterImage.getVVector()
Gets or sets V vector.
|
static Cad3DPoint |
Cad3DPoint.op_Addition(Cad3DPoint pt1,
Cad3DPoint pt2)
Sum of two points
|
static Cad3DPoint |
Cad3DPoint.op_Multiply(Cad3DPoint pt,
double sc)
Multiplication of a point and a scalar
|
static Cad3DPoint |
Cad3DPoint.op_Subtraction(Cad3DPoint pt1,
Cad3DPoint pt2)
Diff of two points
|
| Modifier and Type | Method and Description |
|---|---|
List<Cad3DPoint> |
CadSection.getBackLineVertices()
Gets or sets the back line vertices.
|
List<Cad3DPoint> |
CadBaseEntity.getBounds()
Minimal and maximal points of entity.
|
List<Cad3DPoint> |
CadSpline.getControlPoints()
Gets or sets the control points.
|
List<Cad3DPoint> |
CadLeader.getCoordinates()
Gets or sets the coordinates.
|
List<Cad3DPoint> |
CadSpline.getFitPoints()
Gets or sets the fit points.
|
List<Cad3DPoint> |
CadMLeaderLine.getLeaderPoints()
Gets or sets the leaderPoints.
|
List<Cad3DPoint> |
CadMesh.getVertices()
Gets or sets vertices
|
List<Cad3DPoint> |
CadSection.getVertices()
Gets or sets the vertices.
|
| Modifier and Type | Method and Description |
|---|---|
static Cad3DPoint |
Cad3DPoint.op_Addition(Cad3DPoint pt1,
Cad3DPoint pt2)
Sum of two points
|
static Cad3DPoint |
Cad3DPoint.op_Multiply(Cad3DPoint pt,
double sc)
Multiplication of a point and a scalar
|
static Cad3DPoint |
Cad3DPoint.op_Subtraction(Cad3DPoint pt1,
Cad3DPoint pt2)
Diff of two points
|
void |
Cad2LineAngularDimension.setAngularArcDefinitionPoint(Cad3DPoint value)
Gets or sets the angular arc definition point.
|
void |
CadLeader.setAnnotationPlacementPointOffset(Cad3DPoint value)
Gets or sets offset of last leader vertex from annotation placement point
|
void |
CadAngularDimension.setArcDefinitionPoint(Cad3DPoint value)
Gets arc definition point
|
void |
CadArc.setArcExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadHelix.setAxisBasePoint(Cad3DPoint value)
Gets or sets the axis base point.
|
void |
CadRevolvedSurface.setAxisPoint(Cad3DPoint value)
Gets or sets the axis point.
|
void |
CadHelix.setAxisVector(Cad3DPoint value)
Gets or sets the axis vector.
|
void |
CadRevolvedSurface.setAxisVector(Cad3DPoint value)
Gets or sets the axis vector.
|
void |
CadViewport.setAxisXOfUcs(Cad3DPoint value)
Gets or sets the axis x of UCS.
|
void |
CadViewport.setAxisYOfUcs(Cad3DPoint value)
Gets or sets the axis y of UCS.
|
void |
CadBlockEntity.setBasePoint(Cad3DPoint value)
Gets or sets the base point.
|
void |
CadMLeaderContextData.setBasePoint(Cad3DPoint value)
Gets or sets basepoint.
|
void |
CadMLeaderContextData.setBlockContentNormalDirection(Cad3DPoint value)
Gets or sets the block content normal direction.
|
void |
CadMLeaderContextData.setBlockContentPosition(Cad3DPoint value)
Gets or sets the block content position.
|
void |
CadMLeader.setBlockContentScale(Cad3DPoint value)
Gets or sets the block content scale.
|
void |
CadMLeaderContextData.setBlockContentScale(Cad3DPoint value)
Gets or sets the block content scale.
|
void |
CadDimensionBase.setBlockTranslationVector(Cad3DPoint value)
Gets or sets the block translation vector.
|
void |
CadMLeaderLine.setBreakEndPoint(Cad3DPoint value)
Gets or sets the break end point.
|
void |
CadMLeaderNode.setBreakEndPoint(Cad3DPoint value)
Gets or sets the break end point.
|
void |
CadMLeaderLine.setBreakStartPoint(Cad3DPoint value)
Gets or sets the break start point.
|
void |
CadMLeaderNode.setBreakStartPoint(Cad3DPoint value)
Gets or sets the break start point.
|
void |
CadCircle.setCenterPoint(Cad3DPoint value)
Gets or sets the centerPoint.
|
void |
CadEllipse.setCenterPoint(Cad3DPoint value)
Gets or sets the centerPoint.
|
void |
CadViewport.setCenterPoint(Cad3DPoint value)
Gets or sets the center point.
|
void |
CadGeoData.setCoordinateSystemCoordinatesReferencePoint(Cad3DPoint value)
Gets or sets the coordinate system coordinates reference point.
|
void |
CadDimensionOrdinate.setDefinition13(Cad3DPoint value)
Gets or sets the definition13.
|
void |
CadDimensionOrdinate.setDefinition14(Cad3DPoint value)
Gets or sets the definition14.
|
void |
CadDimensionBase.setDefinitionPoint(Cad3DPoint value)
Gets or sets the definition point.
|
void |
Cad2LineAngularDimension.setDefinitionPoint1(Cad3DPoint value)
Gets or sets the definition point1.
|
void |
CadAlignedDimension.setDefinitionPoint1(Cad3DPoint value)
Gets or sets the definition point1.
|
void |
CadRotatedDimension.setDefinitionPoint1(Cad3DPoint value)
Gets or sets the definition point1.
|
void |
Cad2LineAngularDimension.setDefinitionPoint2(Cad3DPoint value)
Gets or sets the definition point2.
|
void |
CadAlignedDimension.setDefinitionPoint2(Cad3DPoint value)
Gets or sets the definition point2.
|
void |
CadRotatedDimension.setDefinitionPoint2(Cad3DPoint value)
Gets or sets the definition point2.
|
void |
CadGeoData.setDesignPoint(Cad3DPoint value)
Gets or sets the design point.
|
void |
CadMText.setDirectionVector(Cad3DPoint value)
Gets or sets the direction vector.
|
void |
CadTolerance.setDirectionVector(Cad3DPoint value)
Gets or sets the direction vector.
|
void |
CadMLeaderNode.setDoglegVector(Cad3DPoint value)
Gets or sets the dogleg vector.
|
void |
CadSpline.setEndTangent(Cad3DPoint value)
Gets or sets the end tangent.
|
void |
CadBaseExtrudedEntity.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadCircle.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadDimensionBase.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadEllipse.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadInsertObject.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadLine.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadLwPolyline.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadMText.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadMultiLine.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadPoint.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadShape.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadSolid.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadSpatialFilter.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadText.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadTolerance.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadTrace.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadUnderlay.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadText.setFirstAlignment(Cad3DPoint value)
Gets or sets the first alignment.
|
void |
Cad3DFace.setFirstCorner(Cad3DPoint value)
Gets or sets the first corner.
|
void |
CadSolid.setFirstCorner(Cad3DPoint value)
Gets or sets the first corner.
|
abstract void |
CadBaseInfinityEntity.setFirstPoint(Cad3DPoint value)
Gets or sets the first point .
|
void |
CadLine.setFirstPoint(Cad3DPoint value)
Gets or sets the first Point.
|
void |
CadRay.setFirstPoint(Cad3DPoint value)
Gets or sets the first point .
|
void |
CadTrace.setFirstPoint(Cad3DPoint value)
Gets or sets the first point.
|
void |
CadXLine.setFirstPoint(Cad3DPoint value)
Gets or sets the first point .
|
void |
Cad3DFace.setFourthCorner(Cad3DPoint value)
Gets or sets the forth corner.
|
void |
CadSolid.setFourthCorner(Cad3DPoint value)
Gets or sets the fourth corner.
|
void |
CadTrace.setFourthPoint(Cad3DPoint value)
Gets or sets the fourth point.
|
void |
CadLeader.setHorizontalDirection(Cad3DPoint value)
Gets or sets the horizontal direction.
|
void |
CadLayout.setInsertionBasePoint(Cad3DPoint value)
Gets or sets the insertion base point.
|
void |
CadAlignedDimension.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadInsertObject.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadMText.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadRasterImage.setInsertionPoint(Cad3DPoint value)
Gets or sets insertion point value.
|
void |
CadRotatedDimension.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadShape.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadTolerance.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadUnderlay.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point .
|
void |
CadMLeaderNode.setLastLeaderLinePoint(Cad3DPoint value)
Gets or sets last leader line point.
|
void |
CadLeader.setLastLeaderVertex(Cad3DPoint value)
Gets or sets the last leader vertex.
|
void |
CadAngularDimension.setLeftBottomPoint(Cad3DPoint value)
Gets left bottom point
|
void |
CadLight.setLightPosition(Cad3DPoint value)
Gets or sets the light position.
|
void |
CadSpatialFilter.setLocalCoordinateSystem(Cad3DPoint value)
Gets or sets the local coordinate system.
|
void |
CadOle2Frame.setLowerRightCorner(Cad3DPoint value)
Gets or sets the lower right corner.
|
void |
CadEllipse.setMajorEndPoint(Cad3DPoint value)
Gets or sets the majour end point.
|
void |
CadLayout.setMaxExtents(Cad3DPoint value)
Gets or sets the maximum extents.
|
void |
CadDimensionBase.setMiddleTextLocation(Cad3DPoint value)
Gets or sets the middle text location.
|
void |
CadMultiLineVectorBlock.setMilterVector(Cad3DPoint value)
Gets or sets the milter vector.
|
void |
CadLayout.setMinExtents(Cad3DPoint value)
Gets or sets the minimum extents.
|
void |
CadLeader.setNormalVector(Cad3DPoint value)
Gets or sets normal vector
|
void |
CadSpline.setNormalVector(Cad3DPoint value)
Gets or sets the normal vector
|
void |
CadViewport.setOriginUcs(Cad3DPoint value)
Gets or sets the origin UCS.
|
void |
CadMLeaderContextData.setPlaneOriginPoint(Cad3DPoint value)
Gets or sets a value indicating whether [plane origin point].
|
void |
CadMLeaderContextData.setPlaneXAxisDirection(Cad3DPoint value)
Gets or sets the plane x axis direction.
|
void |
CadMLeaderContextData.setPlaneYAxisDirection(Cad3DPoint value)
Gets or sets the plane y axis direction.
|
void |
CadPoint.setPointLocation(Cad3DPoint value)
Gets or sets the point location.
|
void |
Cad2LineAngularDimension.setRadiusDefinitionPoint(Cad3DPoint value)
Gets or sets the radius definition point.
|
void |
CadDiametricDimension.setRadiusDefinitionPoint(Cad3DPoint value)
Gets or sets the radius definition point.
|
void |
CadRadialDimension.setRadiusDefinitionPoint(Cad3DPoint value)
Gets or sets the radius definition point.
|
void |
CadExtrudedSurface.setReferenceVector(Cad3DPoint value)
Gets or sets reference vector.
|
void |
CadAngularDimension.setRightBottomPoint(Cad3DPoint value)
Gets right bottom point
|
void |
CadAngularDimension.setRightTopPoint(Cad3DPoint value)
Gets right top point
|
void |
CadText.setSecondAlignmentPoint(Cad3DPoint value)
Gets or sets the second alignment point.
|
void |
Cad3DFace.setSecondCorner(Cad3DPoint value)
Gets or sets the second corner.
|
void |
CadSolid.setSecondCorner(Cad3DPoint value)
Gets or sets the second corner.
|
void |
CadLine.setSecondPoint(Cad3DPoint value)
Gets or sets the second Point.
|
void |
CadTrace.setSecondPoint(Cad3DPoint value)
Gets or sets the second point.
|
void |
CadMultiLineVectorBlock.setSegmentDirection(Cad3DPoint value)
Gets or sets the segment direction.
|
void |
CadHelix.setStartPoint(Cad3DPoint value)
Gets or sets the start point.
|
void |
CadMultiLine.setStartPoint(Cad3DPoint value)
Gets the start point.
|
void |
CadSpline.setStartTangent(Cad3DPoint value)
Gets or sets the start tangent.
|
void |
CadExtrudedSurface.setSweepVector(Cad3DPoint value)
Gets or sets sweep vector.
|
void |
CadLight.setTargetLocation(Cad3DPoint value)
Gets or sets the target location.
|
void |
CadMLeaderContextData.setTextDirectionPoint(Cad3DPoint value)
Gets or sets text direction point.
|
void |
CadMLeaderContextData.setTextLocationPoint(Cad3DPoint value)
Gets or sets text location point.
|
void |
CadMLeaderContextData.setTextNormalDirection(Cad3DPoint value)
Gets or sets text normal direction.
|
void |
Cad3DFace.setThirdCorner(Cad3DPoint value)
Gets or sets the third corner.
|
void |
CadSolid.setThirdCorner(Cad3DPoint value)
Gets or sets the third corner.
|
void |
CadTrace.setThirdPoint(Cad3DPoint value)
Gets or sets the third point.
|
void |
CadSweptSurface.setTwistControlVector(Cad3DPoint value)
Gets or sets the twist control vector.
|
void |
CadLayout.setUcsOrigin(Cad3DPoint value)
Gets or sets the UCS origin.
|
void |
CadLayout.setUcsXAxis(Cad3DPoint value)
Gets or sets the UCS x axis.
|
void |
CadLayout.setUcsYAxis(Cad3DPoint value)
Gets or sets the UCS y axis.
|
abstract void |
CadBaseInfinityEntity.setUnitDirectionVector(Cad3DPoint value)
Gets or sets the unit direction vector.
|
void |
CadRay.setUnitDirectionVector(Cad3DPoint value)
Gets or sets the unit direction vector.
|
void |
CadXLine.setUnitDirectionVector(Cad3DPoint value)
Gets or sets the unit direction vector.
|
void |
CadGeoData.setUpDirection(Cad3DPoint value)
Gets or sets up direction.
|
void |
CadOle2Frame.setUpperLeftCorner(Cad3DPoint value)
Gets or sets the upper left corner.
|
void |
CadRasterImage.setUVector(Cad3DPoint value)
Gets or sets U vector.
|
void |
CadMultiLineVectorBlock.setVertex(Cad3DPoint value)
Gets or sets the vertex.
|
void |
CadSection.setVerticalDirection(Cad3DPoint value)
Gets or sets the vertical direction.
|
void |
CadViewport.setViewDirectionVector(Cad3DPoint value)
Gets or sets the view direction vector.
|
void |
CadViewport.setViewTargetVector(Cad3DPoint value)
Gets or sets the view target vector.
|
void |
CadRasterImage.setVVector(Cad3DPoint value)
Gets or sets V vector.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadSection.setBackLineVertices(List<Cad3DPoint> value)
Gets or sets the back line vertices.
|
void |
CadBaseEntity.setBounds(List<Cad3DPoint> value)
Minimal and maximal points of entity.
|
void |
CadSpline.setControlPoints(List<Cad3DPoint> value)
Gets or sets the control points.
|
void |
CadLeader.setCoordinates(List<Cad3DPoint> value)
Gets or sets the coordinates.
|
void |
CadSpline.setFitPoints(List<Cad3DPoint> value)
Gets or sets the fit points.
|
void |
CadMLeaderLine.setLeaderPoints(List<Cad3DPoint> value)
Gets or sets the leaderPoints.
|
void |
CadMesh.setVertices(List<Cad3DPoint> value)
Gets or sets vertices
|
void |
CadSection.setVertices(List<Cad3DPoint> value)
Gets or sets the vertices.
|
| Constructor and Description |
|---|
Cad3DFace(Cad3DPoint firstCorner,
Cad3DPoint secondCorner,
Cad3DPoint thirdCorner,
Cad3DPoint fourthCorner)
Initializes a new instance of the
Cad3DFace class. |
CadArc(Cad3DPoint centerPoint,
double radius,
double startAngle,
double endAngle)
Initializes a new instance of the
CadArc class. |
CadCircle(Cad3DPoint centerPoint,
double radius)
Initializes a new instance of the
CadCircle class. |
CadEllipse(Cad3DPoint centerPoint,
Cad3DPoint majorEndPoint,
double axisRatio)
Initializes a new instance of the
CadEllipse class. |
CadLine(Cad3DPoint firstPoint,
Cad3DPoint secondPoint)
Initializes a new instance of the
CadLine class. |
CadRasterImage(CadRasterImageDef imageDef,
Cad3DPoint insertionPoint,
Cad3DPoint uVector,
Cad3DPoint vVector)
Initializes a new instance of the
CadRasterImage class. |
CadRay(Cad3DPoint firstPoint,
Cad3DPoint unitDirectionVector)
Initializes a new instance of the
CadRay class. |
CadXLine(Cad3DPoint firstPoint,
Cad3DPoint unitDirectionVector)
Initializes a new instance of the
CadXLine class. |
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadTableEntity.getInsertionPoint()
Gets or sets the insertion point.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadTableEntity.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadXrecordObject.getAlignmentPoint()
Gets or sets the alignment point.
|
Cad3DPoint |
CadAttrib.getAttribAlignmentPoint()
Gets or sets the alignment point.
|
Cad3DPoint |
CadAttDef.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadAttrib.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadAttDef.getFirstAlignment()
Gets or sets the first alignment.
|
Cad3DPoint |
CadAttDef.getSecondAlignment()
Gets or sets the second alignment.
|
Cad3DPoint |
CadAttrib.getTextStartPoint()
Gets or sets the text start point.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadXrecordObject.setAlignmentPoint(Cad3DPoint value)
Gets or sets the alignment point.
|
void |
CadAttrib.setAttribAlignmentPoint(Cad3DPoint value)
Gets or sets the alignment point.
|
void |
CadAttDef.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadAttrib.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadAttDef.setFirstAlignment(Cad3DPoint value)
Gets or sets the first alignment.
|
void |
CadAttDef.setSecondAlignment(Cad3DPoint value)
Gets or sets the second alignment.
|
void |
CadAttrib.setTextStartPoint(Cad3DPoint value)
Gets or sets the text start point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadDataTableColumn.getPoint3D()
Gets or sets the point 3d.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadDataTableColumn.setPoint3D(Cad3DPoint value)
Gets or sets the point 3d.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadOsnapPointRef.getOsnapPoint()
Gets or sets the osnap point.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadOsnapPointRef.setOsnapPoint(Cad3DPoint value)
Gets or sets the osnap point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadHatch.getExtrusionDirection()
Gets or sets the extrusion direction.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadHatch.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
| Modifier and Type | Method and Description |
|---|---|
static Cad3DPoint |
Cad3DPointHelper.cross(Cad3DPoint vc1,
Cad3DPoint vc2)
The cross product of two vectors.
|
static Cad3DPoint |
Cad3DPointHelper.inverse(Cad3DPoint point)
Inverses this instance.
|
static Cad3DPoint |
Cad3DPointHelper.max(Cad3DPoint pt1,
Cad3DPoint pt2)
The maximum of two points.
|
static Cad3DPoint |
Cad3DPointHelper.min(Cad3DPoint pt1,
Cad3DPoint pt2)
The minimum of two points.
|
static Cad3DPoint |
Cad3DPointHelper.rotatePoint(Cad3DPoint pointToRotate,
Cad3DPoint centerPoint,
double angleInRadians)
Rotates one point arount another one
|
| Modifier and Type | Method and Description |
|---|---|
static double |
Cad3DPointHelper.angleBetween3Points(Cad3DPoint a,
Cad3DPoint b,
Cad3DPoint c)
Angles the between3 points.
|
static Cad3DPoint |
Cad3DPointHelper.cross(Cad3DPoint vc1,
Cad3DPoint vc2)
The cross product of two vectors.
|
static double |
Cad3DPointHelper.distance(Cad3DPoint point,
Cad3DPoint destination)
The distance.
|
static double |
Cad3DPointHelper.dot(Cad3DPoint vc1,
Cad3DPoint vc2)
The dot product of two vectors.
|
static Cad3DPoint |
Cad3DPointHelper.inverse(Cad3DPoint point)
Inverses this instance.
|
static double |
Cad3DPointHelper.length(Cad3DPoint point)
The length.
|
static Cad3DPoint |
Cad3DPointHelper.max(Cad3DPoint pt1,
Cad3DPoint pt2)
The maximum of two points.
|
static Cad3DPoint |
Cad3DPointHelper.min(Cad3DPoint pt1,
Cad3DPoint pt2)
The minimum of two points.
|
static Cad3DPoint |
Cad3DPointHelper.rotatePoint(Cad3DPoint pointToRotate,
Cad3DPoint centerPoint,
double angleInRadians)
Rotates one point arount another one
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadPolyFaceMesh.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadPolygonMesh.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadPolyline.getExtrusionDirection()
Gets or sets the extrusion direction.
|
Cad3DPoint |
CadPolyline3D.getExtrusionDirection()
Gets or sets the extrusion direction.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadPolyFaceMesh.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadPolygonMesh.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadPolyline.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
void |
CadPolyline3D.setExtrusionDirection(Cad3DPoint value)
Gets or sets the extrusion direction.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
Cad2DVertex.getLocationPoint()
Gets or sets the location point.
|
Cad3DPoint |
Cad3DVertex.getLocationPoint()
Gets or sets the location point.
|
Cad3DPoint |
CadFaceRecord.getLocationPoint()
Gets or sets the location point.
|
Cad3DPoint |
CadPolygonMeshVertex.getLocationPoint()
Gets or sets the location point.
|
Cad3DPoint |
CadVertexBase.getLocationPoint()
Gets or sets the location point.
|
Cad3DPoint |
CadVertexPolyFaceMesh.getLocationPoint()
Gets or sets the location point.
|
| Modifier and Type | Method and Description |
|---|---|
void |
Cad2DVertex.setLocationPoint(Cad3DPoint value)
Gets or sets the location point.
|
void |
Cad3DVertex.setLocationPoint(Cad3DPoint value)
Gets or sets the location point.
|
void |
CadFaceRecord.setLocationPoint(Cad3DPoint value)
Gets or sets the location point.
|
void |
CadPolygonMeshVertex.setLocationPoint(Cad3DPoint value)
Gets or sets the location point.
|
void |
CadVertexBase.setLocationPoint(Cad3DPoint value)
Gets or sets the location point.
|
void |
CadVertexPolyFaceMesh.setLocationPoint(Cad3DPoint value)
Gets or sets the location point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadWipeout.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadWipeoutBase.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadWipeoutRasterImage.getInsertionPoint()
Gets or sets the insertion point.
|
Cad3DPoint |
CadWipeout.getVectorU()
Gets or sets the vector u.
|
Cad3DPoint |
CadWipeoutBase.getVectorU()
Gets or sets the vector u.
|
Cad3DPoint |
CadWipeoutRasterImage.getVectorU()
Gets or sets the vector u.
|
Cad3DPoint |
CadWipeout.getVectorV()
Gets or sets the vector v.
|
Cad3DPoint |
CadWipeoutBase.getVectorV()
Gets or sets the vector v.
|
Cad3DPoint |
CadWipeoutRasterImage.getVectorV()
Gets or sets the vector v.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadWipeout.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadWipeoutBase.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadWipeoutRasterImage.setInsertionPoint(Cad3DPoint value)
Gets or sets the insertion point.
|
void |
CadWipeout.setVectorU(Cad3DPoint value)
Gets or sets the vector u.
|
void |
CadWipeoutBase.setVectorU(Cad3DPoint value)
Gets or sets the vector u.
|
void |
CadWipeoutRasterImage.setVectorU(Cad3DPoint value)
Gets or sets the vector u.
|
void |
CadWipeout.setVectorV(Cad3DPoint value)
Gets or sets the vector v.
|
void |
CadWipeoutBase.setVectorV(Cad3DPoint value)
Gets or sets the vector v.
|
void |
CadWipeoutRasterImage.setVectorV(Cad3DPoint value)
Gets or sets the vector v.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CadUcsTableObject.getDirectionX()
Gets or sets the direction x.
|
Cad3DPoint |
CadUcsTableObject.getDirectionY()
Gets or sets the direction y.
|
Cad3DPoint |
CadUcsTableObject.getOrigin()
Gets or sets the origin.
|
Cad3DPoint |
CadUcsTableObject.getOrthographicTypeOrigin()
Gets or sets the orthographic type origin.
|
Cad3DPoint |
CadViewTableObject.getTargetPoint()
Gets or sets the target point.
|
Cad3DPoint |
CadViewTableObject.getUcsOrigin()
Gets or sets the ucs origin.
|
Cad3DPoint |
CadVportTableObject.getUcsOrigin()
Gets or sets the ucs origin.
|
Cad3DPoint |
CadViewTableObject.getUcsXaxis()
Gets or sets the ucs xaxis.
|
Cad3DPoint |
CadVportTableObject.getUcsXaxis()
Gets or sets the ucs xaxis.
|
Cad3DPoint |
CadViewTableObject.getUcsYaxis()
Gets or sets the ucs yaxis.
|
Cad3DPoint |
CadVportTableObject.getUcsYaxis()
Gets or sets the ucs yaxis.
|
Cad3DPoint |
CadViewTableObject.getViewDirection()
Gets or sets the view direction.
|
Cad3DPoint |
CadVportTableObject.getViewDirection()
Gets or sets the view direction.
|
Cad3DPoint |
CadVportTableObject.getViewTargetPoint()
Gets or sets the view target point.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CadUcsTableObject.setDirectionX(Cad3DPoint value)
Gets or sets the direction x.
|
void |
CadUcsTableObject.setDirectionY(Cad3DPoint value)
Gets or sets the direction y.
|
void |
CadUcsTableObject.setOrigin(Cad3DPoint value)
Gets or sets the origin.
|
void |
CadUcsTableObject.setOrthographicTypeOrigin(Cad3DPoint value)
Gets or sets the orthographic type origin.
|
void |
CadViewTableObject.setTargetPoint(Cad3DPoint value)
Gets or sets the target point.
|
void |
CadViewTableObject.setUcsOrigin(Cad3DPoint value)
Gets or sets the ucs origin.
|
void |
CadVportTableObject.setUcsOrigin(Cad3DPoint value)
Gets or sets the ucs origin.
|
void |
CadViewTableObject.setUcsXaxis(Cad3DPoint value)
Gets or sets the ucs xaxis.
|
void |
CadVportTableObject.setUcsXaxis(Cad3DPoint value)
Gets or sets the ucs xaxis.
|
void |
CadViewTableObject.setUcsYaxis(Cad3DPoint value)
Gets or sets the ucs yaxis.
|
void |
CadVportTableObject.setUcsYaxis(Cad3DPoint value)
Gets or sets the ucs yaxis.
|
void |
CadViewTableObject.setViewDirection(Cad3DPoint value)
Gets or sets the view direction.
|
void |
CadVportTableObject.setViewDirection(Cad3DPoint value)
Gets or sets the view direction.
|
void |
CadVportTableObject.setViewTargetPoint(Cad3DPoint value)
Gets or sets the view target point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
CF2Image.getMaxPoint()
Gets the max point.
|
Cad3DPoint |
CF2Image.getMinPoint()
Gets the min point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
DgnImage.getMaxPoint()
Gets the max point.
|
Cad3DPoint |
DgnImage.getMinPoint()
Gets the min point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
DgnArcBasedElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnBSplineCurveElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnCellHeaderElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnCompoundElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnConeElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnDimensionElement.getMaxPoint()
Gets the max point of object.
|
abstract Cad3DPoint |
DgnDrawingElementBase.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnLineElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnSharedCellElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnSurfaceElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnTextElement.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DgnArcBasedElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnBSplineCurveElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnCellHeaderElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnCompoundElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnConeElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnDimensionElement.getMinPoint()
Gets the min point of object.
|
abstract Cad3DPoint |
DgnDrawingElementBase.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnLineElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnSharedCellElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnSurfaceElement.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DgnTextElement.getMinPoint()
Gets the min point of object.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
DwfPage.getMaxPoint()
Gets the max point.
|
Cad3DPoint |
DwfPage.getMinPoint()
Gets the min point.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
DwfWhipViewPort.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DwfWhipViewPort.getMinPoint()
Gets the min point of object.
|
| Modifier and Type | Method and Description |
|---|---|
abstract Cad3DPoint |
DwfWhipDrawable.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DwfWhipEllipse.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DwfWhipImageBase.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DwfWhipPointSet.getMaxPoint()
Gets the max point of object.
|
abstract Cad3DPoint |
DwfWhipDrawable.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DwfWhipEllipse.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DwfWhipImageBase.getMinPoint()
Gets the min point of object.
|
Cad3DPoint |
DwfWhipPointSet.getMinPoint()
Gets the min point of object.
|
| Modifier and Type | Method and Description |
|---|---|
Cad3DPoint |
DwfWhipText.getMaxPoint()
Gets the max point of object.
|
Cad3DPoint |
DwfWhipText.getMinPoint()
Gets the min point of object.
|
