EmfPlusFillClosedCurve Class

Summary: The EmfPlusFillClosedCurve record specifies filling the interior of a closed cardinal spline

Module: aspose.imaging.fileformats.emf.emfplus.records

Full Name: aspose.imaging.fileformats.emf.emfplus.records.EmfPlusFillClosedCurve

Inheritance: EmfPlusDrawingRecordType

Aspose.Imaging Version: 24.6.0

Constructors

Name	Description
EmfPlusFillClosedCurve(source)	Initializes a new instance of the EmfPlusFillClosedCurve class.

Properties

Name	Type	Access	Description
brush_id	int	r/w	Gets or sets the brush identifier A 32-bit unsigned integer that specifies the EmfPlusBrush, the content of which is determined by the S bit in the Flags field. This brush is used to fill the interior of the closed cardinal spline.
compressed	bool	r/w	Gets or sets a value indicating whether this EmfPlusFillClosedCurve is compressed. This bit indicates whether the PointData field specifies compressed data. If set, PointData specifies absolute locations in the coordinate space with 16-bit integer coordinates. If clear, PointData specifies absolute locations in the coordinate space with 32-bit floating-point coordinates. ———————- A “winding” fill operation fills areas according to the “even-odd parity” rule. According to this rule, a test point can be determined to be inside or outside a closed curve as follows: Draw a line from the test point to a point that is distant from the curve. If that line crosses the curve an odd number of times, the test point is inside the curve; otherwise, the test point is outside the curve. ——————— An “alternate” fill operation fills areas according to the “non-zero” rule. According to this rule, a test point can be determined to be inside or outside a closed curve as follows: Draw a line from a test point to a point that is distant from the curve. Count the number of times the curve crosses the test line from left to right, and count the number of times the curve crosses the test line from right to left. If those two numbers are the same, the test point is outside the curve; otherwise, the test point is inside the curve.
data_size	int	r/w	Gets or sets a 32-bit unsigned integer that MUST define the 32-bit–aligned number of bytes of data in the RecordData field that follows. This number does not include the 12-byte record header.
flags	short	r/w	Gets or sets a 16-bit unsigned integer that contains information for some records on how the operation is to be performed and on the structure of the record.
is_color	bool	r/w	Gets or sets a value indicating whether this instance is color. If set, BrushId specifies a color as an EmfPlusARGB object (section 2.2.2.1). If clear, BrushId contains the index of an EmfPlusBrush object (section 2.2.1.1) in the EMF+ Object Table.
point_data	PointF[]	r/w	Gets or sets the point data An array of Count points that specify the endpoints of the lines that define the spline. In a closed cardinal spline, the curve continues through the last point in the PointData array and connects with the first point in the array
relative	bool	r/w	Gets or sets a value indicating whether this EmfPlusFillClosedCurve is relative. This bit indicates whether the PointData field specifies relative or absolute locations. If set, each element in PointData specifies a location in the coordinate space that is relative to the location specified by the previous element in the array. In the case of the first element in PointData, a previous location at coordinates (0,0) is assumed. If clear, PointData specifies absolute locations according to the C flag. Note If this flag is set, the C flag (above) is undefined and MUST be ignored.
size	int	r/w	Gets or sets a 32-bit unsigned integer that specifies the 32-bit-aligned number of bytes in the entire record, including the 12-byte record header and record-specific data.
tension	float	r/w	Gets or sets the tension A 32-bit floating point value that specifies how tightly the spline bends as it passes through the points. A value of 0.0 specifies that the spline is a sequence of straight lines. As the value increases, the curve becomes more rounded. For more information, see [SPLINE77] and [PETZOLD].
type	EmfPlusRecordType	r	Gets a 16-bit unsigned integer that identifies the record type.
winding	bool	r/w	Gets or sets a value indicating whether this EmfPlusFillClosedCurve is winding. This bit indicates how to perform the fill operation. If set, the fill is a “winding” fill. If clear, the fill is an “alternate” fill.

Constructor: EmfPlusFillClosedCurve(source)

 EmfPlusFillClosedCurve(source) 

Initializes a new instance of the EmfPlusFillClosedCurve class.

Parameters:

Parameter	Type	Description
source	EmfPlusRecord	The source.